There are currently 32 tech tips on the SECO website. Tech tips are added periodically, bookmark this page and check back often.
1 How to use the Metric Direct Elevation Rod
2 How to use the Mini Bob Prism Mount
3 Prism Pole maintenance
4 SECO GPS Tripod length test - all models
5 Calibrating the SECO 5001-10 Rod Level
6 Upgrading your Thumb Release Bipod or Tripod
7 Adjusting the SECO #4200 Hand Level
8 Using the SECO 2071 Prism H.T. Adapter
9 Measuring Prism Heights
10 Using the SECO Tripod Elevator Head Adapter
11 Replacing Walk Chain Thread
12 Using SECO Tribrach Adjusters
13 Setup a SECO Precise GPS Antenna Tripod
14 Adjusting the SECO Precise Prism Pole
15 Using the SECO Direct Elevation Rod
16 Using the SECO 5900 Hidden Point Measuring System
17 Maintaining a SECO Thumb Release Bipod or Tripod
18 Nodal Point Alignment on Eclipse canister
19 Calibrating your prism pole's 40-minute vial
20 Tech Tip #20 is now obsolete
21 Setting Up a SECO GPS Optical Plummet
22 Determining "Plumbing Accuracy" of SECO Vials
25 Adjusting and repairing the SECO SurLoc assembly
26 Repairing SECO Compression Locks
27 Maintaining a SECO Quick Release pole
28 Tech Tip #28 is now obsolete
29 Troubleshooting Service Problems with Precise Tip
30 Maintaining a SECO 'Original Thumb Release' Bipod or Tripod
31 Using SECO Hand Levels
32 Using the Height Gauge on the Aluminum Builders Rod
33 Using the #2133-10
34 Sizing and ordering a SECO safety vest
